UE

Granulated sulphur
Material Safety Data Sheet
Form
yellow and grey-yellow granule
Chemical and physical characteristcs
 
melting point 112,8 [°C]
boiling point 444,6 [°C]
bulk density 1200-1350 [kg/m3]
Quality parameters
sulphur content, no less than 99.95 %
ash content, no more than 0.04 %
acids content expressed as H2SO4 content, no more than 0.007 %
organic material content, not more than 0.015 %
water content, no more than 0.2 %
Granulation
size grade 0.5–3.2 mm, no less than 90 %
grain screening 0.5 mm and size grade 3.2–10 mm, no more than 10 %
Use
In organic and inorganic chemical industry, e.g. for production and processing of rubber, in binders and adhesives, for production of chemicals used in agriculture, road works, construction works and food industry.
Transport
  • land: in three-layer paper bags or polyethylene bags of 25 [kg] each on pallets covered with heat-shrink foil/stretch or in big-bag packaging on pallets, by rail or road transport; in bulk in special wagons
  • sea: in containers; in paper or polyethylene bags 25 [kg] or in big bags

Granular sulphur is not subject to the ADR/RID regulations pursuant to special provision No. 242

Powder sulphur
Material Safety Data Sheet
Form
bright-yellow powder
Chemical and physical characteristics
melting point 112,8 °C
boiling point 444,6 °C
bulk density 550-750 [kg/m3]
Quality parameters
sulphur content, no less than 99,85%
ash content, no more than 0,1 %
acid content in H2SO4, not more than 0,01 %
organic material content, not more than 0,02 %
water content, no more than 0,2 %
                                            Granulation
mesh fraction from a sieve with square mesh side of 0.063 mm, no more than 0,3
mesh fraction from a sieve with square mesh side of 0.15 mm, no more than 0,0
Use
In organic and inorganic chemical industry, e.g. for production and processing of rubber, in binders and adhesives, for production of chemicals used in agriculture, road works, construction works and food industry.
Transport
  • land - in three-layer paper bags of 25 [kg] each on pallets covered with heat-shrink foil/stretch or in big-bag packaging on pallets, by rail or road transport
  • sea: in containers, in three-layer paper bags of 25 [kg] each on pallets covered with heat-shrink foil or in big-bag packaging on pallets

Milled sulphur is not subject to the ADR regulations in accordance with the Classification Certificate No. 031/IPO-BC/2019 issued by the Organic Industry Institute in Warszawa on 14 June 2019.

Oil sulphur powder 1%
Material Safety Data Sheet
Form
bright-yellow powder
Chemical and physical characteristics
 
melting point 90 - 100 °C
boiling point 290 °C
bulk density 600 - 800 kg/m3
Quality parameters
sulphur content, no less than 98 %
mineral oil content 1.0 ± 0.3 %
ash content, no more than 0.1 %
acids content expressed as H2SO4 content, no more than 0.01 %
content of volatile parts, no more than 0.2 %
Granulation
mesh fraction from a sieve with square mesh side of 0.063 mm, no more than 0.6
mesh fraction from a sieve with square mesh side of 0.125 mm, no more than 0.2
mesh fraction from a sieve with square mesh side of 0.15 mm, no more than 0.0
Use
In the chemical industry, e.g. for the production and processing of rubber.
Transport
  • land: in big-bag packaging on pallets or in three-layer paper bags of 25 [kg] each on pallets covered with heat-shrink foil/stretch, by rail or car,
  • sea: in containers, in three-layer paper bags of 25 [kg] each on pallets covered with heat-shrink foil or in big-bag packaging on pallets

Milled oiled sulphur containing 1.0% oil is not subject to the ADR regulations in accordance with the Classification Certificate No. 032/IPO-BC/2019 issued by the Organic Industry Institute in Warszawa on 14 June 2019.